Kavach Band Setup
Point a band or watch at the Kavach Care platform
- Step 1: Prepare
- Step 2: Connect
- Step 3: Verify
This browser cannot talk to Bluetooth
Open this page in Chrome or Edge on an Android phone, a Windows or Mac laptop, or a Chromebook. iPhone Safari does not support Web Bluetooth.
Before you tap Connect
- Insert an active SIM with a data pack and close the tray.
- Power the device off, then on. It listens for setup only for the first 30 seconds after boot. On a B2315G band, open About and long-press when the version shows; that puts it in setup mode.
- Tap Connect below within those 30 seconds and pick the device whose name starts with CF or the firmware version (C23…, W20…).
The page writes the platform address and port, reads back the confirmation, and the device restarts on its own. Nothing else is changed.
Waiting
- Device
- –
- Previous server
- –
- New server
- –
Check that it reached the platform
Type the 15-digit IMEI printed on the box or shown on the About screen. The page watches for its first login. With a live SIM this takes about a minute after the restart.
Not watching
Advanced
Default writes port . Domain form writes . Older bands ignore the domain form; if a device never appears after a domain write, redo it with the IP.